CT8135
PRODUCT PROFILE
Each has its own advantages and disadvantages. Recognize your own needs
So why is siphon type dominant in the current bathroom market? Brands such as American Standard and TOTO, which adhere to American standards, entered the Chinese market earlier and people have formed purchasing habits. Moreover, the major advantage of siphon suction is its low flushing noise, also known as quietness. However, due to the use of the instantaneous powerful kinetic energy of water flow, the sound of impact on the pipe wall is not very pleasant, and most complaints about bathroom noise are targeted at this.
After market research, it was found that people are not particularly concerned about the noise during flushing. On the contrary, they are more concerned about the water noise behind them, as it lasts for at least a few minutes. Some toilets sound like a sharp whistle when filling water. Direct flushing cannot avoid the sound of direct flushing, but they emphasize the quietness of water filling. Moreover, after using the toilet, people hope that the flushing process is as short as possible. The direct flushing method can achieve immediate results, while the siphon suspension process is also quite embarrassing. But the siphon type water seal is high, so it is not easy to smell.
In fact, no matter what Toilet flushing method is chosen for the toilet bowl, there will always be some pleasing and annoying aspects. From the perspective of water conservation alone, the straight flush type is definitely slightly better, but if there are elderly people who prefer quietness at home, it should be considered carefully. Although the siphon Toilet type is not perfect in combining water conservation and flushing, its development in the domestic market is already very mature, and it is quiet and odorless. So when choosing a style later, you still need to adapt to local conditions and choose the advantageous sanitary ware products that you value more.
Product display
| Model Number | CT8135 |
| Installation Type | Floor Mounted |
| Structure | Two Piece |
| Flushing method | Washdown |
| Pattern | P-trap:180mm Roughing-in |
| MOQ | 5SETS |
| Package | Standard export packing |
| Payment | TT, 30% deposit in advance,balance against B/L copy |
| Delivery time | Within 45-60 days after received the deposit |
| Toilet seat | Soft closed toilet seat |
| Sales Term | Ex-factory |
product feature
THE BEST QUALITY
Efficient flushing
Clean without dead corner
High efficiency flushing
system, whirlpool strong
flushing, take everything
away without dead corner
Remove cover plate
Quickly remove cover plate
Easy installation
easy disassembly
and convenient design
Slow descent design
Slow lowering of cover plate
The cover plate is
slowly lowered and
damped to calm down
OUR BUSINESS
The mainly export countries
The product export to all of the world
Europe, USA, Middle-East
Korea, Africa, Australia
product process
FAQ
Q1. Are you manufactory or trading company ?
A.We are 25 year-old manufactory and have a professional foreign trade team. Our main products are bathroom ceramic wash basins.
We are also welcome you to visit our factory and show you our big chain supply system.
Q2.Can you produce according to the samples ?
A. Yes ,we can provide OEM+ODM service. We can produce client’s own logos and designs (shape , printing, color, hole, logo, packing etc.).
Q3.What is your terms of delivery ?
A. EXW,FOB
Q4.How long is your delivery time?
A. Generally it is 10-15 days if the goods are in stock. Or it takes about 15-25 days if the goods are not in stock , it is
according to order quantity.
Q5.Do you test all your goods before delivery?
A. Yes, we have 100% test before delivery.
There are two flush buttons on the toilet bowl.
Which one should I press?
Many people don't know
Today, we finally have the answer!
First, let's analyze the structure of the toilet tank.
Generally,
There are some structures in the water tank of a flush toilet:
Float, water inlet pipe, drain pipe,
Seepage pipe, water plug, flush button.
They form a toilet drainage structure,
forming a flushing action.
After we go to the toilet, we press the flush button,
At this time, we will turn the drain knob and the water will be released.
After a certain degree of release, the water plug will fall and block the outlet,
stop the water discharge, and the float will also drop as the water level drops.
When the water is filled,
the float of the water tank will also rise,
and the drainage step can be performed again.
Why does the toilet cover have two buttons?
In fact, these two buttons are respectively the buttons for half water and full water drainage. Usually, the two buttons are of different sizes. The small button means half water state. Pressing it will not completely drain the water in the water tank at one time, but only drain half or one third of it. The large button is the full water button. When you press it, the water in the water tank will usually be drained at one time. Some toilets are designed to press both buttons at the same time. Pressing them at the same time means full water flushing, which has greater horsepower and more water. This design is designed to save water. In this way, you can discharge different flushing volumes according to your needs. Therefore, the buttons are designed to be large and small. The large button will of course have a larger flushing volume, while the small button will of course have a smaller flushing volume. If we only need to urinate, the small button is enough. Tips: Five commonly used different pressing methods
1. Press the small button lightly: the force is very small, suitable for urination with small amount of force;
2. Long press the small button: flush more urine;
3. Press the big button lightly: can flush away 1~2 pieces of feces;
4. Long press the big button: can flush away 3~4 pieces of feces, this button is used for normal feces;
5. Press both at the same time: this kind of force is the strongest, suitable for constipation, when the feces are very sticky and can't be flushed clean.
As the earth's resources become more and more scarce,
we must develop good water-saving habits when using toilets,
after all, little by little, saving water once and for all,
can save us a lot of water bills in a month,
save a lot of money,
and most importantly, it can effectively protect the earth's water resources.
Tips for saving water in toilets
If we want to save more water in toilet flushing,
I will teach you a little trick, that is, put some stones or pebbles, empty plastic bottles, etc. in the water tank of the ceramic toilet,
so that the drainage volume will be less,
which will save water resources.
The specific operation method is as follows:
1
Find a plastic bottle, just the right size,
The editor recommends a 400ml mineral water bottle,
The height is just right.
However, if the volume of your toilet water tank is already very small,
Then it is recommended to choose a smaller bottle,
Otherwise it will not be flushed clean.
Then fill it with tap water,
It is best to fill it up and tighten the lid.
Open the lid of the toilet water tank, and be careful to handle it with care~!
Put in a bottle filled with water, so that the next time you use it,
The amount of water entering the toilet will be much smaller than before,
Thereby effectively saving water,
At least 400ml.
Close the lid of the toilet tank and
flush it quickly~!
