Modern families have a strong awareness of environmental protection and energy conservation, and furniture and household appliances place great emphasis on environmental protection and energy conservation performance, and the selection of toilets is no exception. As the name suggests, water-saving toilets can save a lot of water and are a very popular choice. So what is the principle of water-saving toilets and what are the purchasing tips?
Principle of water-saving toilets – Introduction to the principle of water-saving toilets
The reuse of wastewater here takes water-saving toilets as an example: water-saving toilets are a type of double chamber and double hole water-saving toilet, involving a sitting toilet. By combining a dual chamber and dual hole toilet with an anti overflow and anti odor water storage bucket below the washbasin, wastewater reuse is achieved, achieving the goal of water conservation. The present invention is developed on the basis of existing sitting toilets, mainly including a toilet, toilet water tank, water baffle, wastewater chamber, water purification chamber, two water inlets, two drainage holes, two independent flushing pipes, toilet triggering device, and anti overflow and odor storage bucket. Domestic wastewater is stored in anti overflow and odor storage buckets and connecting pipes to the wastewater chamber of the toilet water tank, and excess wastewater is discharged into the sewer through the overflow pipe; The inlet of the wastewater chamber is not equipped with an inlet valve, while the drainage holes of the wastewater chamber, the drainage holes of the clean water chamber, and the inlet of the clean water chamber are all equipped with valves; When flushing the toilet, both the wastewater chamber drain valve and the clean water chamber drain valve are triggered simultaneously,
Wastewater flows through the wastewater flushing pipeline to flush the bedpan from below, while purified water flows through the purified water flushing pipeline to flush the bedpan from above, completing the flushing of the toilet together.
Principle of water-saving toilets – Introduction to the selection method of water-saving toilets
1. Looking at the ceramic body: If it is a licensed water-saving toilet or an unlicensed water-saving toilet, the technology is not meticulous enough, and its firing temperature is only 89 degrees Celsius, it is easy to cause a high water absorption rate of the body, and it will turn yellow over time. So, when choosing a toilet, pay more attention to the quality of the body.
2. Glaze: The outer layer of non branded water-saving toilets is usually made of ordinary glaze, which is not smooth enough and stains are easy to remain. This can lead to the phenomenon of being unable to flush clean multiple times. In addition, if it is not smooth enough, more bacteria will be trapped, affecting hygiene. A good toilet will use high-quality antibacterial glaze, with good smoothness and easy flushing.
3. Water parts: Water parts are the most critical part of a water-saving toilet, directly determining the lifespan and flushing effect of the toilet. Many people will find that after using the toilet at home for a period of time, there are problems such as hard buttons, inability to bounce back when pressed, or inability to flush, which indicates that you have chosen a toilet with poor water quality,
If the warranty is not in place, then the toilet can only be replaced with a new one.
Through the above introduction to the principles and purchasing techniques of water-saving toilets, I hope everyone has a better understanding of water-saving toilets. When decorating the bathroom, everyone should pay attention to selecting the appropriate style of toilet, and also pay attention to the method of using the toilet in daily life,
Don’t always press the flush button frequently.
