Choose a suitable ceramic toilet
Special attention should be paid here:
5. Then you need to understand the drainage volume of the toilet. The state stipulates the use of toilets below 6 liters. Most of the toilet commode on the market now are 6 liters. Many manufacturers have also launched toilet bowl with separate large and small toilets, with two switches of 3 liters and 6 liters. This design is more conducive to water saving. In addition, there are manufacturers that have launched 4.5 liters. When you choose, it is best to do a flushing experiment, because the amount of water will affect the use effect.
6. The last point to note is that the water tank accessories of the toilet are easily overlooked. In fact, the water tank accessories are like the heart of the toilet and are more likely to have quality problems. When purchasing, pay attention to choosing accessories with good quality, low water injection noise, strong and durable, and can withstand long-term immersion in water without corrosion or scaling
Product display
Pay attention to five steps when choosing in the market: look, touch, weigh, compare, and try
1. Look at the overall appearance. Well-known stores have their own characteristics and model rooms, and various qualification certificates that can prove their strength are placed in a relatively obvious position. Whether the samples are placed neatly and beautifully can reflect from one side the importance and care that the manufacturer attaches to its own brand.
2. Touch the surface. The glaze and body of high-end toilets are relatively delicate, and the surface will not feel uneven when touched. The glaze of low-end and medium-end toilets is darker. Under the light, pores will be found, and the glaze and body are relatively rough.
3. Weigh the weight. High-end toilets must use high-temperature ceramics in sanitary ceramics. The firing temperature of this ceramic is above 1200°C. The material structure has completed the crystal phase transformation, and the generated structure is extremely dense glass phase, which meets the requirements of full ceramicization of sanitary ware. It feels heavy when weighed. Medium and low-end toilets are made of medium and low-temperature ceramics in sanitary ceramics. These two types of ceramics cannot complete the crystal phase transformation due to their low firing temperature and short firing time, so they cannot meet the requirements of full ceramicization.
4. Specific water absorption rate. The most obvious difference between high-temperature ceramics and medium and low-temperature ceramics is the water absorption rate. The water absorption rate of high-temperature ceramics is less than 0.2%. The product is easy to clean and will not absorb odors, and will not cause cracking and local leakage of the glaze. The water absorption rate of medium and low-temperature ceramics is much higher than this standard and is easy to enter sewage. It is not easy to clean and will emit unpleasant odors. Over time, cracking and leakage will occur.
5. Test flushing. For a toilet, the most important function is flushing, and whether the toilet pipeline design is scientific and reasonable is the biggest factor affecting flushing. Therefore, most regular manufacturers' stores or dealers have water testing tables for customers to test the water. The standard specified in GB-T6952-1999 requires that when the water volume is less than or equal to 6 liters, at least 5 water-filled ping-pong balls should be flushed out after 3 flushes.
Pay attention to five steps when choosing in the market: look, touch, weigh, compare, and try
1. Look at the overall appearance water closet. Well-known stores have their own characteristics and model rooms, and various qualification certificates that can prove their strength are placed in a relatively obvious position. Whether the samples are placed neatly and beautifully can reflect from one side the importance and care that the manufacturer attaches to its own brand.
2. Touch the surface. The glaze and body of high-end toilets are relatively delicate, and the surface will not feel uneven when touched. The glaze of low-end and medium-end toilets is darker. Under the light, pores will be found, and the glaze and body are relatively rough.
3. Weigh the weight. High-end flushing toilet must use high-temperature ceramics in sanitary ceramics. The firing temperature of this ceramic is above 1200°C. The material structure has completed the crystal phase transformation, and the generated structure is extremely dense glass phase, which meets the requirements of full ceramicization of sanitary ware. It feels heavy when weighed. Medium and low-end toilets are made of medium and low-temperature ceramics in sanitary ceramics. These two types of ceramics cannot complete the crystal phase transformation due to their low firing temperature and short firing time, so they cannot meet the requirements of full ceramicization.
4. Specific water absorption rate. The most obvious difference between high-temperature ceramics and medium and low-temperature ceramics is the water absorption rate. The water absorption rate of high-temperature ceramics is less than 0.2%. The product is easy to clean and will not absorb odors, and will not cause cracking and local leakage of the glaze. The water absorption rate of medium and low-temperature ceramics is much higher than this standard and is easy to enter sewage. It is not easy to clean and will emit unpleasant odors. Over time, cracking and leakage will occur.
5. Test flushing. For a toilet flush, the most important function is flushing, and whether the toilet pipeline design is scientific and reasonable is the biggest factor affecting flushing. Therefore, most regular manufacturers' stores or dealers have water testing tables for customers to test the water. The standard specified in GB-T6952-1999 requires that when the water volume is less than or equal to 6 liters, at least 5 water-filled ping-pong balls should be flushed out after 3 flushes.
product feature
THE BEST QUALITY
EFFICIENT FLUSHING
CLEAN WIT THOUT DEAD CORNER
High efficiency flushing
system, whirlpool strong
flushing, take everything
away without dead corner
Remove cover plate
Quickly remove cover plate
Easy installation
easy disassembly
and convenient design
Slow descent design
Slow lowering of cover plate
The cover plate is
slowly lowered and
damped to calm down
OUR BUSINESS
The mainly export countries
The product export to all of the world
Europe, USA, Middle-East
Korea, Africa, Australia
product process
FAQ
1. What's the production capacity of production line?
1800 sets for toilet and basins per day.
2. What is your terms of payment?
T/T 30% as deposit,and 70% before delivery.
We will show you the photos of the products and packages before you pay the balance.
3. What package/packing do you provide?
We accept OEM for our customer, the package can be designed for customers' willing.
Strong 5 layers carton filled with foam, standard export packing for shipping requirement.
4. Do you provide OEM or ODM service?
Yes,we can do OEM with your own logo design printed on the product or carton.
For ODM,our requirement is 200 pcs per month per model.
5. What are your terms for being your sole agent or distributor?
We would require a minimum order quantity for 3*40HQ - 5*40HQ containers per month.
