There are two flush buttons on the toilet, and most people press the wrong one!
Two flush buttons on the toilet commode ,
Which one should I press?
This is a question that has always troubled me.
Today I finally have the answer!
First, let’s analyze the structure of the toilet tank.
Generally speaking,
The water tank of a flush toilet will have some structures like this:
Float ball, inlet pipe, drain pipe,
Seepage pipe, water plug, flushing button.
They form the drainage structure of a toilet,
Formed a flushing action.
When it's convenient for us, press the flush button,
At this point, the water release knob will be turned and the water will be released,
After releasing to a certain extent, the water plug will fall and block the outlet,
Stop releasing water, and the float will also descend with the decrease of water level.
After the water filling is completed,
The float of the water tank will also rise,
You can proceed with the drainage process again.
Why do toilet seats have two buttons?
Actually, these two buttons,
The buttons are for half water and full water drainage, respectively,
Usually, the two buttons have different sizes,
The small button means it is in a semi water state,
Pressing it will not completely drain the water in the tank at once,
But only half or one-third.
And the big button is the full water button,
When it is pressed,
Usually, the water in the tank is drained all at once.
And some toilet designs are,
Two buttons can be pressed simultaneously,
Simultaneously pressing means flushing all the water, with greater horsepower and more water volume.
PRODUCT PROFILE
Product display
This design is designed to save water,
This way, according to one's own needs,
Discharge different amounts of flushing water,
So the buttons are designed to be one big and one small.
The larger button will certainly have a larger amount of flushing water,
And smaller buttons certainly have a smaller flushing volume,
If it's just a small solution when we use it,
It's enough to use the small buttons.
Tips: Five commonly used different pressing methods
1. Lightly press the small button: It has a low impact and is suitable for urinating with low impact;
2. Long press the small button: flush out a lot of urine;
3. Lightly press the big button: it can flush out 1-2 lumps of feces;
4. Long press the big button: can flush out 3-4 lumps of feces, this button is used for normal bowel movements;
5. Press both at the same time: This type has the most powerful impact and is suitable for use when constipation occurs or when the stool is very sticky and cannot be cleaned thoroughly.
With the increasing scarcity of Earth's resources,
We must develop good water-saving habits when using toilets,
After all, small things add up, saving water time and time again,
It can also save us a lot of water bills in a month,
Save a lot of money,
The most important thing is to effectively protect the Earth's water resources.
The specific operation method is as follows:
one
Find a plastic bottle that is suitable,
A 400ml mineral water bottle is recommended,
The height is just right.
However, if the capacity of your toilet water tank is already very small,
So it is recommended to choose a smaller bottle,
Otherwise, it won't be clean.
Then fill it with tap water,
It's best to fill it up and tighten the lid.
Open the toilet lid of the toilet water tank and handle it gently~!
Put a bottle filled with water so that the next time it is used,
The water intake of the toilet will be much smaller than before,
Thereby effectively saving water,
Save at least 400ml.
Close the lid of the toilet water tank,
Then try flushing it!
product feature
THE BEST QUALITY
EFFICIENT FLUSHING
CLEAN WIT THOUT DEAD CORNER
High efficiency flushing
system, whirlpool strong
flushing, take everything
away without dead corner
Remove cover plate
Quickly remove cover plate
Easy installation
easy disassembly
and convenient design
Slow descent design
Slow lowering of cover plate
The cover plate is
slowly lowered and
damped to calm down
OUR BUSINESS
The mainly export countries
The product export to all of the world
Europe, USA, Middle-East
Korea, Africa, Australia
product process
FAQ
1. What's the production capacity of production line?
1800 sets for toilet and basins per day.
2. What is your terms of payment?
T/T 30% as deposit,and 70% before delivery.
We will show you the photos of the products and packages before you pay the balance.
3. What package/packing do you provide?
We accept OEM for our customer, the package can be designed for customers' willing.
Strong 5 layers carton filled with foam, standard export packing for shipping requirement.
4. Do you provide OEM or ODM service?
Yes,we can do OEM with your own logo design printed on the product or carton.
For ODM,our requirement is 200 pcs per month per model.
5. What are your terms for being your sole agent or distributor?
We would require a minimum order quantity for 3*40HQ - 5*40HQ containers per month.
