When it comes to the toilet, we must think of the toilet. Now people also pay attention to the decoration of the toilet. After all, the toilet is relatively comfortable, and people will be comfortable when taking a bath. For the toilet, there are many brands of toilet, which adds confusion to people’s choices. Many people don’t know how to choose the toilet in the classical style and the precautions for toilet selection. Here is the relevant introduction.
How to choose the classic bowl:
A: Look at the weight
The heavier the toilet, the better. The weight of the ordinary toilet is about 50 jin, and the weight of the good toilet is about 100 jin. The toilet with large weight has high density and good quality. A simple way to test the weight of the toilet: take up the water tank cover with both hands and weigh it.
B: Water outlet
There is one drain hole at the bottom of the toilet. Now there are 2-3 drain holes of many brands (according to different diameters), but the more drain holes, the more impact the impact. The water outlet of the toilet can be divided into lower drainage and horizontal drainage. The distance between the water outlet and the wall behind the water tank should be measured, and the toilet of the same model should be bought to “seat at the right distance, otherwise the toilet can not be installed.
The outlet of the horizontal drainage toilet should be the same height as the horizontal drainage outlet, which should be slightly higher to ensure the smooth flow of sewage. 30cm is the middle drainage toilet, and 20-25cm is the rear drainage toilet; The distance above 40 cm is the front water toilet. If the model is slightly wrong, the water will not flow smoothly.
C: Glaze
Pay attention to the glaze of the toilet. The glaze of the toilet with good quality should be smooth and smooth without bubbles, and the color should be saturated. After inspecting the glaze of the outer surface, you should also touch the drain of the toilet. If it is rough, it will easily cause hangings in the future.
D: Caliber
Large-diameter sewage pipes with glazed inner surface are not easy to hang dirty, and the sewage is fast and powerful, effectively preventing clogging. The test method is to put the whole hand into the toilet mouth. Generally, it is better to have one palm capacity.
E Water tank
The leakage of the toilet water storage tank is generally not easy to detect except for the obvious dripping sound. The simple inspection method is to drop blue ink into the toilet water tank, and after mixing, check whether there is blue water flowing out of the toilet water outlet. If there is any, it indicates that there is water leakage in the toilet. Remind me, it is better to choose a higher water tank, which has a good impulse.
F: Water parts
Water parts directly determine the service life of the toilet. The quality of the water parts of the brand toilet is very different from that of the ordinary toilet, because almost every family has experienced the pain that the water tank does not produce water. Therefore, when selecting the toilet, do not ignore the water parts. The identification method is to listen to the button sound and make a clear sound.
G: Flushing
From a practical point of view, the toilet should first have the basic function of thorough flushing. Therefore, the flushing method is very important. Toilet flushing can be divided into direct flushing, rotating siphon, vortex siphon and jet siphon. Pay attention to the selection of different drainage methods: the toilet can be divided into “p trap toilet“, “siphon toilet” and “siphon vortex type” according to the drainage method.
The water injection volume of flushing and siphon flushing is about 6 liters, and the sewage discharge capacity is quite strong, which is loud; Whirlpool type uses a lot of water at a time, but it has a good mute effect. If it is home decoration, consumers should try to flush the toilet directly. It has the advantages of both direct flush and siphon. It can not only wash dirt quickly, but also save water.
Precautions when selecting the classical style toilet:
A. Drainage mode: lower row or rear row.
B. Determine the distance between drainage walls (pit distance).
C. When selecting the toilet, it is necessary to observe whether the toilet glaze is uniform, whether there is color difference and obvious deformation, how the degree is, and whether the surface defects (brown eyes, spots, cracks, orange glaze, ripples, spots, and falling dirt) can be strictly controlled. The well-glazed toilet is smooth, delicate and flawless, and can still be as smooth as new after repeated washing. If the quality of the glaze is poor, it is easy to make the dirt hang on the walls of the toilet.
D. Determine the water consumption. Those less than or equal to 6 liters of water are water-saving closets. Generally, the water storage capacity of closets is adjustable, and the water consumption can be adjusted according to the characteristics of families.
E. The toilet can be divided into two parts: split and connected. The split toilet is generally small in size and suitable for small toilets. The connected toilet has smooth lines and novel design. There are many styles to choose from.
F. Look at the internal drainage connector.
If the quality of the sealing pad and content link is poor, the toilet is easy to scale and block, and it is easy to leak. The sealing gasket shall be made of rubber or foam plastic with large elasticity and good sealing performance.
G. Look at the service.
Choose reputable brand products, such as Fanza, Wrigley, Meijiahua and other sanitary ware. The manufacturer provides free installation services.
After reading the above text introduction, we must have understood how to select the classical style toilet toilet and the precautions for toilet selection. When selecting the toilet, we must choose a formal brand, which will be convenient in the future use process and avoid the possibility of frequent water blocking. In addition, we should pay attention to many points when selecting closestool. It depends on whether the porcelain quality is good or not and how to compare the goods so that we can buy products.
