How to choose Water Closet
1、 Weight
The heavier the toilet, the better. A regular toilet weighs around 50 pounds, while a good toilet weighs around 100 pounds. A heavy toilet has high density and good quality. A simple method to test the weight of a Modern Toilet: Pick up the water tank cover with both hands and weigh it.
2、 Water outlet
It is best to have one drain hole at the bottom of the toilet. Nowadays, many brands have 2-3 drain holes (depending on the diameter), but the more drain holes there are, the more impact it will have. There are two types of water outlets in the bathroom: bottom drainage and horizontal drainage. It is important to measure the distance between the center of the bottom outlet and the wall behind the water tank, and buy a toilet of the same model to seat it. Otherwise, the toilet cannot be installed. The outlet of the horizontal drainage toilet should be at the same height as the horizontal drainage outlet, preferably slightly higher, to ensure smooth sewage flow. A 30 centimeter toilet is a middle drainage toilet; a 20 to 25 centimeter toilet is a back drainage toilet; a distance of more than 40 centimeters is a front drainage toilet. If the model is slightly incorrect, the drainage will not be smooth.
3、 Glazed surface
Pay attention to the glaze of the toilet bowl. A high-quality toilet should have a smooth and smooth glaze without bubbles, with a saturated color. After inspecting the surface glaze, you should also touch the drain of the toilet. If it is rough, it can easily cause hanging in the future.
4、 Caliber
Large diameter sewage pipes with glazed inner surfaces are less prone to getting dirty and discharge quickly and effectively, preventing blockages. The testing method is to place the entire hand into the toilet seat, with the best palm capacity.
5、 toilet tank
The leakage of the toilet water storage tank is generally not easy to detect, except for a noticeable dripping sound. A simple inspection method is to drip blue ink into the toilet commode water tank, stir well, and check if there is blue water flowing out of the toilet water outlet. If there is, it indicates that there is a leakage in the toilet. Just a reminder, it's best to choose a water tank with a higher height, as it has a good impact. (Note: Flushing capacity below 6 liters can be classified as water-saving toilets.)
6、 Water components
The water component directly determines the service life of the toilet. There is a significant difference in the quality of the water components between branded toilets and regular toilets, as almost every household has experienced the pain of the water tank not flowing out. Therefore, when choosing a toilet, do not ignore the water component. The best identification method is to listen to the button sound and make a clear sound.
7、 Flushing water
From a practical perspective, the toilet should first have the basic function of thorough flushing. So, the flushing method is very important, and toilet flushing can be divided into direct flushing, rotating siphon, vortex siphon, and jet siphon. Pay attention to choosing different drainage methods: Toilets can be divided into "flushing type", "siphon flushing type", and "siphon vortex type" according to the drainage method. The flushing and siphon flushing have a water injection volume of about 6 liters and strong drainage capacity, but the sound is loud during flushing; The vortex type requires a large amount of water at once, but it has a good soundproofing effect. Consumers may want to try Sunrise's direct flush siphon toilet, which combines the advantages of both direct flush and siphon. It can quickly flush dirt and also save water.
Detailed explanation of toilet classification
Classified by type into connected and separated styles
The choice of a connected or split toilet mainly depends on the size of the bathroom space. The split toilet is more traditional, and in production, screws and sealing rings are used to connect the base and the second layer of the water tank in the later stage, which takes up a larger space and easily hides dirt at the connection joints;
The integrated toilet is more modern and high-end, with a beautiful body shape and a wide range of options, forming an integrated whole. But the price is relatively expensive.
Divided into rear row and bottom row according to the direction of pollution discharge
The back row type, also known as the wall row type or the horizontal row type, can determine its direction of discharge based on its literal meaning. When selecting a rear seat toilet, the height of the center of the drain outlet above the ground should be considered, which is generally 180mm;
Bottom row toilet, also known as floor or vertical row toilet, as the name suggests, refers to a toilet with a drainage outlet on the ground. When choosing a lower row toilet, attention should be paid to the distance between the center point of the drain outlet and the wall. The distance between the drain outlet and the wall is divided into three types: 400mm, 305mm, and 200mm. The northern market has a high demand for 400mm pit spacing products. There is a high demand for 305mm pit pitch products in the southern market.
For many friends who are renovating, the toilet is a very important component of the bathroom space.
PRODUCT PROFILE
This suite comprises an elegant pedestal sink and traditionally designed toilet complete with soft close seat. Their vintage appearance is bolstered by high quality manufacturing made from exceptionally hardwearing ceramic, your bathroom will look timeless and refined for years to come.
Product display
product feature
THE BEST QUALITY
EFFICIENT FLUSHING
CLEAN WIT THOUT DEAD CORNER
High efficiency flushing
system, whirlpool strong
flushing, take everything
away without dead corner
Remove cover plate
Quickly remove cover plate
Easy installation
easy disassembly
and convenient design
Slow descent design
Slow lowering of cover plate
The cover plate is
slowly lowered and
damped to calm down
OUR BUSINESS
The mainly export countries
The product export to all of the world
Europe, USA, Middle-East
Korea, Africa, Australia
product process
FAQ
1. What's the production capacity of production line?
1800 sets for toilet and basins per day.
2. What is your terms of payment?
T/T 30% as deposit,and 70% before delivery.
We will show you the photos of the products and packages before you pay the balance.
3. What package/packing do you provide?
We accept OEM for our customer, the package can be designed for customers' willing.
Strong 5 layers carton filled with foam, standard export packing for shipping requirement.
4. Do you provide OEM or ODM service?
Yes,we can do OEM with your own logo design printed on the product or carton.
For ODM,our requirement is 200 pcs per month per model.
5. What are your terms for being your sole agent or distributor?
We would require a minimum order quantity for 3*40HQ - 5*40HQ containers per month.