Introduction: The toilet is very convenient for people’s daily life and is loved by many people, but how much do you know about the brand of the toilet? So, have you ever understood the precautions for installing a toilet and its flushing method? Today, the editor of Decoration Network will briefly introduce the flushing method of the toilet and the precautions for toilet installation, hoping to help everyone.
The toilet is very convenient for people’s daily life and is loved by many people, but how much do you know about the brand of the toilet? So, have you ever understood the precautions for installing a toilet and its flushing method? Today, the editor of Decoration Network will briefly introduce the flushing method of the toilet and the precautions for toilet installation, hoping to help everyone.
Detailed explanation of flushing methods for toilets
Explanation of Flushing Methods for Toilets 1. Direct Flushing
The direct flush toilet uses the impulse of water flow to discharge feces. Generally, the pool wall is steep and the water storage area is small, so the hydraulic power is concentrated. The hydraulic power around the toilet ring increases, and the flushing efficiency is high.
Advantages: the flushing pipeline of the direct flush toilet is simple, the path is short, and the pipe diameter is thick (generally 9 to 10 cm in diameter). The toilet can be flushed clean by using the Gravitational acceleration of water. The flushing process is short. Compared with the siphon toilet, the direct flush toilet has no return bend, so it is easy to flush large dirt. It is not easy to cause blockage in the flushing process. There is no need to prepare a paper basket in the toilet. In terms of water conservation, it is also better than a siphon toilet.
Disadvantages: The biggest drawback of direct flush toilets is the loud flushing sound. Additionally, due to the small water storage surface, scaling is prone to occur, and the odor prevention function is not as good as that of siphon toilets. In addition, there are relatively few types of direct flush toilets in the market, and the selection range is not as large as that of siphon toilets.
Explanation of Flushing Methods for Toilets 2. Siphon Type
The structure of a siphon type toilet is that the drainage pipeline is in a “Å” shape. After the drainage pipeline is filled with water, there will be a certain water level difference. The suction generated by the flushing water in the sewage pipe inside the toilet will discharge the toilet. Since the siphon type toilet does not rely on the force of water flow for flushing, the water surface in the pool is larger and the flushing noise is smaller. The siphon type toilet can also be divided into two types: vortex type siphon and jet type siphon.
Detailed Explanation of Flushing Methods for Toilets – Precautions for Toilet Installation
Explanation of the Flushing Method of the Toilet 2. Siphon (1) Swirl Siphon
This type of toilet flushing port is located on one side of the bottom of the toilet. When flushing, the water flow forms a vortex along the pool wall, which increases the flushing force of the water flow on the pool wall and also increases the suction force of the siphon effect, making it more conducive to discharging dirty things from the toilet.
Explanation of Flushing Methods for Toilets 2. Siphon (2) Jet Siphon
Further improvements have been made to the siphon type toilet by adding a spray secondary channel at the bottom of the toilet, aligned with the center of the sewage outlet. When flushing, a portion of the water flows out from the water distribution hole around the toilet, and a portion is sprayed out by the spray port. This type of toilet uses a larger water flow force on the basis of siphon to quickly flush away the dirt.
Advantages: The biggest advantage of a siphon toilet is its low flushing noise, which is called mute. In terms of flushing capacity, the siphon type is easy to flush out the dirt adhering to the surface of the toilet because it has a higher water storage capacity and better odor prevention effect than the direct flush type. There are many types of siphon type toilets on the market now, and there will be more choices when buying a toilet.
Disadvantages: When flushing a siphon toilet, the water must be drained to a very high surface before the dirt can be washed down. Therefore, a certain amount of water must be available to achieve the purpose of flushing. At least 8 to 9 liters of water must be used each time, which is relatively water intensive. The diameter of the siphon type drainage pipe is only about 5 or 6 centimeters, which can easily block when flushing, so toilet paper cannot be directly thrown into the toilet. Installing a siphon type toilet usually requires a paper basket and a strap.
Detailed explanation of precautions for toilet installation
A. After receiving the goods and conducting on-site inspection, installation begins: Before leaving the factory, the toilet should undergo strict quality inspection, such as water testing and visual inspection. Products that can be sold in the market are generally qualified products. However, remember that regardless of the size of the brand, it is necessary to open the box and inspect the goods in front of the merchant to check for obvious defects and scratches, and to check for color differences in all parts.
Detailed Explanation of Flushing Methods for Toilets – Precautions for Toilet Installation
B. Pay attention to adjusting the ground level during inspection: After purchasing a toilet with the same wall spacing size and sealing cushion, the installation can begin. Before installing the toilet, a comprehensive inspection of the sewage pipeline should be carried out to see if there are any debris such as mud, sand, and waste paper blocking the pipeline. At the same time, the floor of the toilet installation position should be checked to see if it is level, and if uneven, the floor should be leveled when installing the toilet. Saw the drain short and try to raise the drain as high as possible by 2mm to 5mm above the ground, if conditions permit.
C. After debugging and installing the water tank accessories, check for leaks: First, check the water supply pipe and rinse the pipe with water for 3-5 minutes to ensure the cleanliness of the water supply pipe; Then install the angle valve and the connecting hose, connect the hose to the water inlet valve of the installed water tank fitting and connect the water source, check whether the water inlet valve inlet and seal are normal, whether the installation position of the drain valve is flexible, whether there is jamming and leakage, and whether there is a missing water inlet valve filter device.
D. Finally, test the drainage effect of the toilet: the method is to install the accessories in the water tank, fill it with water, and try flushing the toilet. If the water flow is rapid and rushing quickly, it indicates that the drainage is unobstructed. Conversely, check for any blockage.
Alright, I believe everyone has gained an understanding of the toilet flushing method and installation precautions explained by the editor of the decoration website. I hope it will be helpful to you! If you want to learn more about toilets, please continue to follow our website!
The article is carefully reprinted from the internet, and the copyright belongs to the original author. The purpose of this website’s reprinting is to spread information more widely and better utilize its value. If there are copyright issues, please contact this website for the author.
