Who can introduce the material of ceramic toilets? Its advantages and disadvantages
The material of the ceramic toilet is ceramic, which is made of porcelain clay fired at high temperature and has a layer of glaze on the surface. The advantages are beautiful, easy to clean, and long service life. The disadvantage is that it is easily damaged during transportation
Is the American standard water porcelain ultra clean technology toilet flushed clean due to increased water flow
No, the reason why the water ceramic ultra clean technology washes clean is because the ceramic material of the toilet has strong hydrophilicity, which can strongly attract water molecules and allow water flow to intervene between the ceramic surface and the dirt. Therefore, the force of the water flow during each flush causes the dirt to fall off, achieving an easy cleaning effect, not because it increases the water flow.
Personally, I think the flushing of the American Standard toilet is quite awesome. The American Standard’s water ceramic ultra cleaning technology focuses on the function of removing dirt and inhibiting water stains. According to the salesperson’s introduction, the ceramic material for this technology’s toilet has strong hydrophilicity. When flushing, water will enter between the surface of the toilet and the dirt, causing the dirt to loosen and fall off. I have seen their on-site demonstration at the exhibition, and the comparison effect is still very obvious.
4. Why is the toilet made of ceramics
Because the original toilet was made of wood, but its hardness was not enough, and it was prone to water leakage and difficult to shape into a certain shape. Over time, feces will remain on the toilet, breeding bacteria and spreading diseases. Later, some people suggested using stones and lead to make toilets, that is, heating the stones and lead, and then sealing the gaps with asphalt, resin, and wax. This type of toilet solves the problem of leakage, but it is very cumbersome to manufacture and is very cumbersome to use. Combined with a lot of dust, sitting on it in winter can be cold and bring many health risks. After Chinese porcelain entered Europe, it opened a new chapter in the development of toilet technology. As Europeans mastered the craft of porcelain making, porcelain gradually developed from its initial luxury goods to the raw materials for making toilets. Ceramic toilets are both sturdy and non leaking, free from residual bacteria, easy to clean, and have a long service life, making them a leap in the history of toilet development. In 1883, Thomas? Turifed commercialized ceramic toilets and became the most widely used sanitary ware. So now toilets are all made of ceramics.
A toilet needs to have the ability to complete the following three tasks: firstly, it must be a flushing machine; Secondly, it must be waterproof, clean, and hygienic; Finally, it must be sturdy. Because people sit on the toilet, while some people weigh heavily. And porcelain has already met the above three needs. The design of the toilet is actually very complex, with water tanks, valves, overflow pipes, and sewage pipes – all of which are very delicate and contain many intricate engineering applications. Ceramic toilets like glass are made of clay and water. The process of producing toilets includes billet manufacturing, billet forming, and porcelain sintering. These processes are relatively simple and cost-effective. On the other hand, the process of making plastic into objects is extrusion or injection molding. The cost of using plastic to make a toilet with a complex structure is too high. That’s why plastic is usually only used as a seat in toilets: using it as the main material can lead to high costs. Another factor is durability. We all need to squat on the toilet – when we squat on it, it’s best not to leak or spray anything. Porcelain with super durability is very sturdy and rigid. This plastic cannot be guaranteed. If you are a thin and normal person, you may not have a deep understanding of this point. However, for an overweight person, if they make a hard landing every time they use the toilet, and the toilet is a durable item, it can be imagined that over time, plastic materials will gradually bend under one or two strong impacts on an average day. This is a very important user experience.
A toilet needs to have the ability to complete the following three tasks: firstly, it must be a flushing machine; Secondly, it must be waterproof, clean, and hygienic; Finally, it must be sturdy. Because people sit on the toilet, while some people weigh heavily. And porcelain has already met the above three needs. The design of the toilet is actually very complex, with water tanks, valves, overflow pipes, and sewage pipes – all of which are very delicate and contain many intricate engineering applications. Ceramic toilets like glass are made of clay and water. The process of producing toilets includes billet manufacturing, billet forming, and porcelain sintering. These processes are relatively simple and cost-effective. On the other hand, the process of making plastic into objects is extrusion or injection molding. The cost of using plastic to make a toilet with a complex structure is too high. That’s why plastic is usually only used as a seat in toilets: using it as the main material can lead to high costs. Another factor is durability. We all need to squat on the toilet – when we squat on it, it’s best not to leak or spray anything. Porcelain with super durability is very sturdy and rigid. This plastic cannot be guaranteed. If you are a thin and normal person, you may not have a deep understanding of this point. However, for an overweight person, if they make a hard landing every time they use the toilet, and the toilet is a durable item, it can be imagined that over time, plastic materials will gradually bend under one or two strong impacts on an average day. This is a very important user experience.
Because the original toilet was made of wood, but its hardness was not enough, and it was prone to water leakage and difficult to shape into a certain shape. Over time, feces will remain on the toilet, breeding bacteria and spreading diseases. Later, some people suggested using stones and lead to make toilets, that is, heating the stones and lead, and then sealing the gaps with asphalt, resin, and wax. This type of toilet solves the problem of leakage, but it is very cumbersome to manufacture and is very cumbersome to use. Combined with a lot of dust, sitting on it in winter can be cold and bring many health risks. After Chinese porcelain entered Europe, it opened a new chapter in the development of toilet technology. As Europeans mastered the craft of porcelain making, porcelain gradually developed from its initial luxury goods to the raw materials for making toilets. Ceramic toilets are both sturdy and non leaking, free from residual bacteria, easy to clean, and have a long service life, making them a leap in the history of toilet development. In 1883, Thomas? Turifed commercialized ceramic toilets and became the most widely used sanitary ware. So now toilets are all made of ceramics. This answer is recommended by Cai Hongling, a renowned expert in healthy lifestyle classification
Because the original toilet was made of wood, but its hardness was not enough, and it was prone to water leakage and difficult to shape into a certain shape. Over time, feces will remain on the toilet, breeding bacteria and spreading diseases. Later, some people suggested using stones and lead to make toilets, that is, heating the stones and lead, and then sealing the gaps with asphalt, resin, and wax. This type of toilet solves the problem of leakage, but it is very cumbersome to manufacture and is very cumbersome to use. Combined with a lot of dust, sitting on it in winter can be cold and bring many health risks. After Chinese porcelain entered Europe, it opened a new chapter in the development of toilet technology. As Europeans mastered the craft of porcelain making, porcelain gradually developed from its initial luxury goods to the raw materials for making toilets. Ceramic toilets are both sturdy and non leaking, free from residual bacteria, easy to clean, and have a long service life, making them a leap in the history of toilet development. In 1883, Thomas? Turifed commercialized ceramic toilets and became the most widely used sanitary ware. So now toilets are all made of ceramics.
