Luxury Unleashed: Create Your Private Spa Retreat

There are two flush buttons on the toilet bowl.

Which one should I press?

Many people don't know

Today, we finally have the answer!

First, let's analyze the structure of the toilet tank.

Generally,

There are some structures in the water tank of a flush toilet:

Float, water inlet pipe, drain pipe,

Seepage pipe, water plug, flush button.

They form a toilet drainage structure,

forming a flushing action.

After we go to the toilet, we press the flush button,

At this time, we will turn the drain knob and the water will be released.

After a certain degree of release, the water plug will fall and block the outlet,

stop the water discharge, and the float will also drop as the water level drops.

When the water is filled,

the float of the water tank will also rise,

and the drainage step can be performed again.

Why does the toilet cover have two buttons?

In fact, these two buttons are respectively the buttons for half water and full water drainage. Usually, the two buttons are of different sizes. The small button means half water state. Pressing it will not completely drain the water in the water tank at one time, but only drain half or one third of it. The large button is the full water button. When you press it, the water in the water tank will usually be drained at one time. Some toilets are designed to press both buttons at the same time. Pressing them at the same time means full water flushing, which has greater horsepower and more water. This design is designed to save water. In this way, you can discharge different flushing volumes according to your needs. Therefore, the buttons are designed to be large and small. The large button will of course have a larger flushing volume, while the small button will of course have a smaller flushing volume. If we only need to urinate, the small button is enough. Tips: Five commonly used different pressing methods
1. Press the small button lightly: the force is very small, suitable for urination with small amount of force;
2. Long press the small button: flush more urine;
3. Press the big button lightly: can flush away 1~2 pieces of feces;
4. Long press the big button: can flush away 3~4 pieces of feces, this button is used for normal feces;
5. Press both at the same time: this kind of force is the strongest, suitable for constipation, when the feces are very sticky and can't be flushed clean.

As the earth's resources become more and more scarce,

we must develop good water-saving habits when using toilets,

after all, little by little, saving water once and for all,

can save us a lot of water bills in a month,

save a lot of money,

and most importantly, it can effectively protect the earth's water resources.

Tips for saving water in toilets
If we want to save more water in toilet flushing,
I will teach you a little trick, that is, put some stones or pebbles, empty plastic bottles, etc. in the water tank of the ceramic toilet,
so that the drainage volume will be less,
which will save water resources.
The specific operation method is as follows:
1
Find a plastic bottle, just the right size,
The editor recommends a 400ml mineral water bottle,
The height is just right.
However, if the volume of your toilet water tank is already very small,
Then it is recommended to choose a smaller bottle,
Otherwise it will not be flushed clean.
Then fill it with tap water,
It is best to fill it up and tighten the lid.
Open the lid of the toilet water tank, and be careful to handle it with care~!
Put in a bottle filled with water, so that the next time you use it,
The amount of water entering the toilet will be much smaller than before,
Thereby effectively saving water,
At least 400ml.
Close the lid of the toilet tank and

flush it quickly~!